When purchasing a new high and low temperature test chamber, it is more important to place the equipment when it is received. Because of the different size of the model, the high and low temperature test chamber determines the space of the placement position, so the installation site and the surrounding environment. There are certain requirements. In order to avoid various situations when installing equipment, Xiaobian will explain to you some of the site requirements and environment for installation. A brief description of the installation site of the high and low temperature test chamber: the ground is flat and the ventilation is good. There is no strong vibration around the equipment. Keep away from combustibles, explosives, high-temperature heat sources and dusty places. It can also be installed as close as possible to the power supply. Men's Classic Shirts,Men's Normal Shirts,Men's Dress Shirt,Long Sleeve Shirt zhejiang tianjin import and export co.,ltd. , https://www.tianjintextiles.com
Environmental conditions: temperature: 5 ° C ~ +28 ° C (average temperature within 24 hours ≤ 28 ° C), relative humidity: ≤ 85% RH, pressure: 86kPa ~ 106kPa;
Power supply conditions: three-phase four-wire + protective earth line, AC380 (±10%) V / 50HZ;
PS: When installing, the tilt angle of the equipment should not exceed 15 °C, and there must be proper space for use and maintenance around the equipment;
The above instructions for the installation of high and low temperature test chambers, I believe that everyone has a certain initial understanding.