[China Glass Net] Shot blasting machine is mainly used for the removal of oxide scale, welding slag, dust, etc., while increasing the adhesion of the coating. Rope Embroidery Fabric,Rope Embroidery,3 In 1 Embroidery Fabric,Rope Sequins Fabric SHAOXING SKYRISE TEXTILE CO.,LTD , https://www.eurofashiontextile.com
Take all safety measures when using the shot blasting machine:
1. Wear protective clothing, hold a certificate, and operate with less two people. 2. Check if the sandblasting system inside the pipe is normal. During sand blasting, the PLC sets a double-layer blasting tank to control the linkage of the level meter, intake air control valve, differential pressure gauge and exhaust air control valve. It can be continuously sandblasted.
3. Whether the abrasive cyclone is working properly. In the process of sand blasting, the recovered abrasive and dust are effectively separated into the storage hopper. 4. The dust removal system is inspected before blasting, and no dust overflow is ensured during the cleaning (whether the pulse recoil device is effective in cleaning the filter during operation) Dust accumulated on the outer wall)
5. When the end of each class, manually clean the spilled abrasive. It is the cabin recovery chamber of the front and rear sections. 6. Regularly check the connection port of the system to ensure the tightness of the hydraulic piping system. If there is air leakage, it should be maintained in time. (once a month)
7. Regularly remove the dust from the dust box. 8. Check the performance of the wearing parts such as spray guns and sand pipes regularly, and replace them if damaged. (should be done once a week)
9. The filter performance of the dust collector is also checked and replaced in time (once every half year)
10. Lubrication of chain, sprocket and motor should be carried out once a month. 11. Electrical control cabinet should be opened frequently to purge internal dust with compressed air, once a month. 12. When the equipment is working normally, unrelated personnel are prohibited from approaching.
13. Compressed air is prohibited to blow the dust on the body. 14. Failure should be maintained on site and reported to the relevant department for processing.
15. Be sure to pay attention to safety when the shot blasting machine is running.